COMMAND EVERYTHING.

Command Library

Practical commands. Clear explanations. Authoritative sources.

2557 published commands · 2545 documentation-verified · 12 awaiting review · Ask Cmdlet AI

Set-BCSecretKey

Sets the cryptographic key used in the generation of segment secrets.

Set-BCSecretKey [[-Passphrase] <String>] [-Force] [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>]
 [-AsJob] [-WhatIf] [-Confirm] [<CommonParameters>]

Copied 0 times Networking / Security

Set-BgpPeer

Updates the configuration of the specified BGP peer.

Set-BgpPeer [-Name] <String> [-LocalIPAddress <IPAddress>] [-PeerIPAddress <IPAddress>] [-LocalASN <UInt32>]
 [-PeerASN <UInt32>] [-OperationMode <OperationMode>] [-PeeringMode <PeeringMode>] [-HoldTimeSec <UInt16>]
 [-IdleHoldTimeSec <UInt16>] [-MaxAllowedPrefix <UInt32>] [-RoutingDomain <String>] [-PassThru] [-Force]
 [-ClearPrefixLimit] [-Weight <UInt16>] [-RouteReflectorClient <Boolean>] [-CimSession <CimSession[]>]
 [-ThrottleLimit <Int32>] [-AsJob] [-WhatIf] [-Confirm] [<CommonParameters>]

Copied 0 times Networking / Security

Set-BgpRouter

Updates the configuration of the local BGP router for the specified tenant ID.

Set-BgpRouter [-BgpIdentifier <IPAddress>] [-LocalASN <UInt32>] [-CompareMEDAcrossASN <Boolean>]
 [-DefaultGatewayRouting <Boolean>] [-IPv6Routing <IPv6RoutingState>] [-RoutingDomain <String>] [-PassThru]
 [-Force] [-LocalIPv6Address <IPAddress>] [-TransitRouting <TransitRouting>] [-RouteReflector <RouteReflector>]
 [-ClusterId <UInt32>] [-ClientToClientReflection <ClientToClientReflection>] [-CimSession <CimSession[]>]
 [-ThrottleLimit <Int32>] [-AsJob] [-WhatIf] [-Confirm] [<CommonParameters>]

Copied 0 times Networking / Security

Set-BgpRoutingPolicy

Modifies a routing policy configuration.

Set-BgpRoutingPolicy [-Name] <String> [-PassThru] [-PolicyType <PolicyType>] [-RoutingDomain <String>] [-Force]
 [-AddCommunity <String[]>] [-RemoveCommunity <String[]>] [-RemovePolicyClause <String[]>]
 [-MatchASNRange <UInt32[]>] [-IgnorePrefix <String[]>] [-MatchCommunity <String[]>] [-MatchPrefix <String[]>]
 [-MatchNextHop <IPAddress[]>] [-NewLocalPref <UInt32>] [-NewMED <UInt32>] [-NewNextHop <IPAddress>]
 [-ClearMED] [-RemoveAllCommunities] [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [-WhatIf]
 [-Confirm] [<CommonParameters>]

Copied 0 times Networking / Security

Set-BgpRoutingPolicyForPeer

Modifies BGP routing policies for BGP peers.

Set-BgpRoutingPolicyForPeer -PolicyName <String[]> [-PeerName <String[]>] [-RoutingDomain <String>]
 -Direction <PolicyDirection> [-Force] [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [-WhatIf]
 [-Confirm] [<CommonParameters>]

Copied 0 times PowerShell

Set-CIPolicyIdInfo

Modifies the name and ID of a Code Integrity policy.

Set-CIPolicyIdInfo [-FilePath] <String> [-PolicyName <String>] [-SupplementsBasePolicyID <Guid>]
 [-BasePolicyToSupplementPath <String>] [-ResetPolicyID] [-PolicyId <String>] [<CommonParameters>]

Copied 0 times PowerShell

Set-CIPolicySetting

Modifies the SecureSettings within the Code Integrity policy.

Set-CIPolicySetting [-FilePath] <String> -Provider <String> -Key <String> -ValueName <String>
 -ValueType <String> -Value <String> [<CommonParameters>]

Copied 0 times PowerShell

Set-CIPolicyVersion

Updates the version number of the policy.

Set-CIPolicyVersion -FilePath <String> -Version <String> [<CommonParameters>]Copied 0 times Networking / Security

Set-CertificateAutoEnrollmentPolicy

Sets local certificate auto-enrollment policy.

Set-CertificateAutoEnrollmentPolicy [-StoreName <String[]>] -PolicyState <PolicySetting>
 [-ExpirationPercentage <Int32>] [-EnableTemplateCheck] [-EnableMyStoreManagement]
 [-EnableBalloonNotifications] -context <Context> [-WhatIf] [-Confirm] [<CommonParameters>]

Copied 0 times Windows Server

Set-ClusterAffinityRule

Enable or disable an affinity rule, and update the rule type.

Set-ClusterAffinityRule [[-Name] <String[]>] [-RuleType <RuleType>] [-Enabled <UInt32>]
 [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [-PassThru] [<CommonParameters>]

Copied 0 times Windows Server

Set-ClusterExcludedAdapter

Sets a network adapter to the list of excluded adapters.

Set-ClusterExcludedAdapter -ExclusionType <AdapterExclusionType> -ExclusionValue <String[]>
 [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [<CommonParameters>]

Copied 0 times Windows Server

Set-ClusterFaultDomain

Update an existing cluster fault domain.

Set-ClusterFaultDomain [[-Name] <String[]>] [-Id <String[]>] [-NewName <String>]
 [-Location <String>] [-Description <String>] [-FaultDomain <String>] [-Flags <UInt32>]
 [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [-PassThru] [<CommonParameters>]

Copied 0 times Windows Server

Set-ClusterLog

Sets the size and level of detail for the cluster log.

Set-ClusterLog [-Size <Int32>] [-Level <Int32>] [-InputObject <PSObject>] [-Cluster <String>]
 [<CommonParameters>]

Copied 0 times Windows Server

Set-ClusterOwnerNode

Specifies which nodes can own a resource in a failover cluster or specifies the order of preference among owner nodes for a clustered role, or resource group.

Set-ClusterOwnerNode [-Resource <String>] [-Group <String>] -Owners <StringCollection>
 [-InputObject <PSObject>] [-Cluster <String>] [<CommonParameters>]

Copied 0 times Windows Server

Set-ClusterQuorum

Configures quorum options for a failover cluster.

Set-ClusterQuorum [-DiskOnly <String>] [-NoWitness] [-DiskWitness <String>]
 [-FileShareWitness <String>] [-CloudWitness] [-AccountName <String>] [-Endpoint <String>]
 [-AccessKey <String>] [-InputObject <PSObject>] [-Cluster <String>] [<CommonParameters>]

Copied 0 times Windows Server

Set-ClusterResourceDependency

Specifies the resources that a particular resource depends on within a failover cluster.

Set-ClusterResourceDependency [[-Resource] <String>] [[-Dependency] <String>]
 [-InputObject <PSObject>] [-Cluster <String>] [<CommonParameters>]

Copied 0 times Windows Server

Set-ClusterStorageSpacesDirect

Sets S2D cache parameters.

Set-ClusterStorageSpacesDirect [-CacheState <CacheStateType>] [-CacheModeHDD <CacheModeType>]
 [-CacheModeSSD <CacheModeType>] [-Nodes <String[]>] [-SkipEligibilityChecks]
 [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [<CommonParameters>]

Copied 0 times Windows Server

Set-ClusterStorageSpacesDirectDisk

Configures the system to enable S2D to claim or not claim specific physical disks.

Set-ClusterStorageSpacesDirectDisk [-CanBeClaimed <Boolean>] [-PhysicalDiskIds <String[]>]
 [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [-WhatIf] [-Confirm]
 [<CommonParameters>]

Copied 0 times PowerShell

Set-Culture

Sets the user culture for the current user account.

Set-Culture [-CultureInfo] <CultureInfo> [<CommonParameters>]Copied 0 times Networking / Security

Set-DAAppServerConnection

Configures the properties of the connection to application servers and the IPsec security traffic protection policies for the connection.

Set-DAAppServerConnection [-ConnectionType <String>] [-TrafficProtection <String>] [-ComputerName <String>]
 [-PassThru] [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [-WhatIf] [-Confirm]
 [<CommonParameters>]

Copied 0 times Networking / Security

Set-DAClient

Configures the properties related to a DirectAccess (DA) client.

Set-DAClient [-ComputerName <String>] [-ForceTunnel <String>] [-OnlyRemoteComputers <String>]
 [-Downlevel <String>] [-PassThru] [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [-WhatIf]
 [-Confirm] [<CommonParameters>]

Copied 0 times Networking / Security

Set-DAClientDnsConfiguration

Configures the DNS server and proxy server addresses of a Name Resolution Policy Table (NRPT) entry and configures the local name resolution property.

Set-DAClientDnsConfiguration [-DnsSuffix <String>] [-DnsIPAddress <String[]>] [-ProxyServer <String>]
 [-Local <String>] [-ComputerName <String>] [-PassThru] [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>]
 [-AsJob] [-WhatIf] [-Confirm] [<CommonParameters>]

Copied 0 times PowerShell

Set-DAClientExperienceConfiguration

Modifies the configuration of the specified DirectAccess client user experience.

Set-DAClientExperienceConfiguration [-PolicyStore <String>] [-GPOSession <String>]
 [[-CorporateResources] <String[]>] [[-IPsecTunnelEndpoints] <String[]>] [[-PreferLocalNamesAllowed] <Boolean>]
 [[-UserInterface] <Boolean>] [[-SupportEmail] <String>] [[-FriendlyName] <String>]
 [[-ManualEntryPointSelectionAllowed] <Boolean>] [[-GslbFqdn] <String>] [[-ForceTunneling] <ForceTunneling>]
 [[-CustomCommands] <String[]>] [[-PassiveMode] <Boolean>] [-CimSession <CimSession[]>]
 [-ThrottleLimit <Int32>] [-AsJob] [-PassThru] [-WhatIf] [-Confirm] [<CommonParameters>]

Copied 0 times Networking / Security

Set-DAEntryPointDC

Modifies domain controller (DC) settings for the entry point.

Set-DAEntryPointDC [-ComputerName <String>] [-NewDC <String>] [-Force] [-PassThru] -EntryPointName <String>
 [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [-WhatIf] [-Confirm] [<CommonParameters>]

Copied 0 times

Command Library

Set-BCSecretKey

Set-BgpPeer

Set-BgpRouter

Set-BgpRoutingPolicy

Set-BgpRoutingPolicyForPeer

Set-CIPolicyIdInfo

Set-CIPolicySetting

Set-CIPolicyVersion

Set-CertificateAutoEnrollmentPolicy

Set-ClusterAffinityRule

Set-ClusterExcludedAdapter

Set-ClusterFaultDomain

Set-ClusterLog

Set-ClusterOwnerNode

Set-ClusterQuorum

Set-ClusterResourceDependency

Set-ClusterStorageSpacesDirect

Set-ClusterStorageSpacesDirectDisk

Set-Culture

Set-DAAppServerConnection

Set-DAClient

Set-DAClientDnsConfiguration

Set-DAClientExperienceConfiguration

Set-DAEntryPointDC

Recently updated