COMMAND EVERYTHING.

Get-NetIPv6Protocol

Gets IPv6 protocol configurations.

Networking / Security · Risk: Low · Documentation Verified

Last verified: 2026-10-26

Microsoft NetTCPIP reference: Gets IPv6 protocol configurations. The syntax and selected example below are adapted from the pinned Windows Server 2025 reference. Module availability, target configuration and delegated permissions determine whether it can run in your environment. Documentation and parameter text: Microsoft, CC BY 4.0; formatting adapted by Cmdlet World. No execution testing is claimed.

Get-NetIPv6Protocol [-DefaultHopLimit <UInt32[]>] [-NeighborCacheLimitEntries <UInt32[]>]
 [-RouteCacheLimitEntries <UInt32[]>] [-ReassemblyLimitBytes <UInt32[]>] [-IcmpRedirects <IcmpRedirects[]>]
 [-SourceRoutingBehavior <SourceRoutingBehavior[]>] [-DhcpMediaSense <DhcpMediaSense[]>]
 [-MediaSenseEventLog <MediaSenseEventLog[]>] [-MldLevel <MldLevel[]>] [-MldVersion <MldVersion[]>]
 [-MulticastForwarding <MulticastForwarding[]>] [-GroupForwardedFragments <GroupForwardedFragments[]>]
 [-RandomizeIdentifiers <RandomizeIdentifiers[]>] [-AddressMaskReply <AddressMaskReply[]>]
 [-DeadGatewayDetection <DeadGatewayDetection[]>] [-UseTemporaryAddresses <UseTemporaryAddresses[]>] [-MaxTemporaryDadAttempts <UInt32[]>]
 [-MaxTemporaryValidLifetime <TimeSpan[]>] [-MaxTemporaryPreferredLifetime <TimeSpan[]>]
 [-TemporaryRegenerateTime <TimeSpan[]>] [-MaxTemporaryDesyncTime <TimeSpan[]>] [-CimSession <CimSession[]>]
 [-ThrottleLimit <Int32>] [-AsJob] [<CommonParameters>]

Copied 0 times

Required permissions

Use an account with the target resource permissions documented for Get-NetIPv6Protocol. Modifying administrative cmdlets may require elevation or delegated administration. This catalog does not assert that ordinary users can execute the command.

Supported environments

Windows / NetTCPIP · Windows Server 2025 documentation; feature/module prerequisites apply

Parameters

-AddressMaskReply: Specifies an array of values for address mask reply. The cmdlet gets the IPv6 protocol configurations that have these values. Address mask reply specifies how the computer responds to ICMP address mask packets. The acceptable values for this parameter are: - Enabled. The computer responds to ICMP address mask packets. - Disabled. The computer does not respond to ICMP address mask packets.
-AsJob: Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
-CimSession: Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
-DeadGatewayDetection: Specifies an array of values for dead gateway detection. The cmdlet gets IPv6 protocol configurations that have these values. Dead gateway detection is a feature that identifies gateways that are not operating properly and switches the computer to a new default gateway if available. The acceptable values for this parameter are: - Enabled - Disabled
-DefaultHopLimit: Specifies an array of values for the default hop limit. The cmdlet gets the IPv6 protocol configurations that have these values. The default hop limit is the default value for the CurrentHopLimit property in the IP interface. The current hop limit is the value that the IP interface writes in the time-to-live (TTL) field in all outbound traffic. When routers forward a packet, they decrement the hop limit by 1 and discard the packet when the hop limit is 0.
-DhcpMediaSense: Specifies an array of values for Media Sense. The cmdlet gets IPv6 protocol configurations that have these values. Media Sense provides a mechanism for the network adapter to notify the protocol stack of media connect and disconnect events. These events trigger the DHCP client to take an action, such as attempting to renew a DHCP lease or removing routes that are related to a disconnected network. When Media Sense is enabled, the network parameters on the laptop of a roaming user are automatically and transparently updated without requiring a restart when the user moves from one location to another. The acceptable values for this parameter are: - Enabled - Disabled
-GroupForwardedFragments: Specifies an array of values for group forwarded fragments. The cmdlet gets IPv6 protocol configurations that have these values. Group forwarded fragments specifies whether the IP interface collects fragments into groups before it forwards the fragments. The acceptable values for this parameter are: - Enabled. The IP interface collects IPv4 protocol fragments into groups before it forwards the fragments. - Disabled. The IP interface does not collect IPv4 protocol fragments into groups before it forwards the fragments.

Prerequisites

Windows with the NetTCPIP module and the Windows feature or management tools that provide it. Confirm target connectivity and version compatibility using the linked Microsoft reference.

Security considerations

This is a read-oriented cmdlet; protect any sensitive results and check the documented effects of your selected parameters.

Examples

Example 1: Get all IPv6 protocol configurations

Get-NetIPv6Protocol

This command gets all IPv6 protocol configurations for the IP interface. The default output for the cmdlet does not include all properties of the NetIPv6Protocol object. Source: Microsoft, CC BY 4.0; transcript prompt/output removed. This example was not executed.

Sources

https://github.com/MicrosoftDocs/windows-powershell-docs/blob/b7645dd8c687139b28e845119da30ec670526507/docset/winserver2025-ps/NetTCPIP/Get-NetIPv6Protocol.md

https://learn.microsoft.com/powershell/module/nettcpip/get-netipv6protocol?view=windowsserver2025-ps

Personal collections

Explain or customize this command with AI

Related commands

Get-NetIPInterface

Add-MpPreference

Get-MpPerformanceReport

Add-DhcpServerInDC